MGM Brakes 3437051 - COMBINATION

Specifications

Aftermarket Unit
Mounting Bolt Thread: 5/8-11
Mounting Bolt Length (in.): 1.660
Port Size: 3/8-18 NPTF
Stroke (in.): 3.00

Service Size: 36
Spring Size: 36

Features & Benefits

• Tamper Resistant Design
• Molded Nitrile Rubber Push-Rod Air Seal
• Center Hole Shield
• Externally Stored Release Bolt
• Epoxy-Coated Head, Non-Pressure Chamber and Lower Push-Rod Assembly
• 360 Aluminum Center Case
• "Long Life" Power Spring
• Epoxy Coated Return Spring
• Weatherseal Plug
• Heavy-Duty Steel Non-Pressure Chamber (8-Gauge Standard on Type 3030 & 3060 Aftermarket Models) (6-Gauge Standard on Type 36 Models)
• Stroke Alert
• Polymer Push-Rod Guides
• Heavy-Duty Nylon Reinforced Diaphragms
• Heavy-Duty Nylon Reinforced Neoprene Diaphragms (Optional)
• Composite Guide -Corrosion Fighter Technology, Type 30 Spring Side Models Only

Model: TR3636

Technical Data

Stroke	3.00" (76.2 mm)
Weight lb (kg) Combination	30.8 lb (14.0 kg)
Weight lb (kg) Single	20.2 lb (9.2 kg)
A	11.13" (282.7 mm)
B	8.38" (212.9 mm)
C	9.25" (235.0 mm)
D	9.18" (233.2 mm)
E	4.75" (120.7 mm)
F	5/8" - 11 UNC
G	5/8" - 18 UNF
Inlets	3/8" - 18 NPTF
X - Min. (aftermarket unit only)	8.00" (203.2 mm)

Replacement Parts

1	Kit -NP Chamber (a)	9015049
2	Kit -Nuts & Bolts	9003001
3	Clamp Band Assembly	8216036
4	Diaphragm	8017836
5	Kit -Push-Rod Assembly (a) SAE	9064004
5a	Kit -Push-Rod Assembly (a) METRIC	9064009
6	Return Spring	8068012
7	Kit -Center Hole Shield	9065002
8	NP Chamber Assembly (a)	8215036
9	Kit -Nuts & Washers SAE	9002001
9a	Kit -Nuts & Washers METRIC	9002002
10	Hex Nut -Yoke SAE	8130004
10a	Hex Nut -Yoke METRIC	8130016
11	Kit -Weatherseal Plug	9019006
12	Kit -Release Bolt	9007009
13	Kit -Piggyback Plus SAE	3437008
*NOTE:	(a)To ensure correct stroke alert positioning, kits MUST only be used on the designated MGM brake units.