Cole Hersee 24400 - SOL,36V,130OHM,CONT

Cole Hersee intermittent and continous solenoids provide safe, dependable control of electrical systems on all type of DC low voltage vehicles. In addition, they are ideal for marine applications and for forward and reverse systems in golf carts, garden tractors, fork lift trucks and winch operation.
Solenoids are relays which are commonly used to remotely switch a heavier current. By using a solenoid, the amount of heavy wiring needed to power the load is reduced, since the control circuit mounted inside the cab typically utilizes a smaller wire gauge.
Housing are available in plated steel, phenolic or plasticized steel. A latching solenoid can act as a remote disconnect switch.


All products listed in this section can be found in Section H of the Cole Hersee D-275 CATALOG.

• Normally Off and Normally On. Special applicationIn Engineering, an application refers to a specific use for a device. For example, a Cole Hersee brand LVD finds an application in police cruisers (as well as many other uses).: for forward and reverse systems in electric golf carts, garden tractors, fork lift trucks, winches, etc. Housing: Steel. continuousCertain switches, like solenoids can be rated for continuous or intermittent (infrequent) use. A comparably-constructed switch can generally be used with a higher current than the other switch, but with the proviso that a cooling time is allowed. There are no such restrictions on a 'continuous duty' switch. You can use a Continuous Duty Solenoid instead in place of an Intermittent Duty Solenoid, but it would have a shorter life expectancy compared to the purpose-built Intermittent Duty Solenoid. You cannot use an Intermittent Duty Solenoid in place of a Continuous Duty Solenoid! Duty, Normally Closed contactsA pair of devices that touch or come apart at the point where the switch throw makes or breaks the circuit. Silver contacts are common because of their low conductivity and low electrical resistance. Many Cole Hersee switches have silver contacts. 35A, Normally Open contacts 85A.

Description	SPDT Continuous Duty Solenoid
Special applications	Forward & reverse systems in golf carts, garden tractors, fork lifts, winches, etc.
Insulated/Grounded	Insulated
NO/NC	Normally open and normally closed
Circuitry	SPDT
Contacts	copper
Housing	plated steel
Voltage rating	36V
Terminals	copper; 10-32 thread and 5/16"-24 thread. Hex nuts and lock washers included
Bracket	Straight
Bracket mounting	Holes 5/16" x 19/32", 2-13/64" on center
Breather hole	no
UL Marine & CE ISO 8846 Marine	Not listed
Min qty	No